PolyMide CoPA (1.75mm, 750g Spool) 3D Printer Filament by PolyMaker
$52.63
PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C. Filament is 1.75mm in diameter with 750g of material on the spool.
30 in stock
Nozzle Temperature:
250˚C – 270˚C
Printing Speed:
30mm/s – 60mm/s
Bed Temperature:
25˚C – 50˚C
Bed Surface:
Glass with glue
Cooling Fan:
OFF
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
MECHANICAL PROPERTIES
Young’s Modulus:
2223 ± 199 Mpa
Tensile Strength:
66.2 ± 0.9 Mpa
Bending Strength:
97.0 ± 1.1 Mpa
Charpy Impact Strength:
9.6 ± 1.4 kJ/m2
THERMAL PROPERTIES
Glass Transition Temperature:
67˚C
Vicat Softening Temperature:
180˚C
Melting Temperature:
190˚C
NOTES
Drying Settings:
100˚C for 8h
Recommended Support Materials:
PolyDissolve™ S1
Other:
It is highly recommended to use the PolyBox™ when printing with PolyMide™ CoPA and to store it in the resealable bag.
To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide™ CoPA 3d printed model.
Annealing settings: 80˚C for 6h
When used extensively, PolyMide CoPA can be abrasive to brass nozzles. When using PolyMide CoPA, we recommend to switch to a wear resistant nozzle such as hardened steel nozzle.
Does PolyMide™ CoPA require an enclosed printer?
No, all our Nylon features our Warp-Free™ Technology which means it does not require a heated bed or heated chamber of more than 50˚C.
PolyMide™ CoPA can be printed on a 30-40˚C bed without enclosure.
Printing, Drying and Annealing Settings
Printing Temperature: 250˚C - 270˚C
Bed Temperature: 25˚C - 50˚C
Printing Speed: 30mm/s - 50mm/s
Fan: OFF
Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 50mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s
Drying Settings: 100˚C for 6h
(Only if the material has absorbed moisture)
Annealing Settings: 80˚ for 6h
Do you need to anneal PolyMide™ CoPA?
PolyMide™ CoPA displays outstanding mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization after the printing process, an additional step is required: Annealing.
You can anneal PolyMide™ CoPA by placing your part in the oven at 80˚C for 6h.
Additional information
| Weight | 2.5 lbs |
|---|---|
| Dimensions | 10 × 10 × 4 in |
| Colors | Black |
